44 Series Extra Heavy Duty: Up to 1500 lbs.

1-888-403-2800

44 Series Extra Heavy Duty: Up to 1500 lbs.

44 Series Extra Heavy Duty: Up to 1500 lbs.

Designed with greater load capacity than our 40 and 42 series, this series protects from damaging shocks or unwanted vibration and movement. Noise levels are reduced through the dampening effect of these casters.

Typical Applications

  • Aircraft tripod jacks
  • Portable medical equipment
  • Computer equipment
  • Shock sensitive loads

Features

  • Load Springs: Maximum rated capacity loads will deflect wheel approximately 3/4". Different load springs permit wide variation in ride "softness." They can be preloaded to obtain various degrees of deflection
  • Swivel Top Plate: AISI 1045 drop forged steel for strength & reliability
  • Yoke Base: AISI 1045 drop forged steel with machined raceway affords extreme wear and greater capacity
  • Swivel Section: Swivel load bearing is 4" diameter deep grooved load raceway with 1/2" steel balls and the thrust race is 2-5/8" diameter using 3/8" diameter steel balls for maximum performance under extreme loads
  • Legs: 3/8" steel plate, welded inside and out to the yoke base to handle side impacts
  • King Bolt: 1" diameter bolt and nut heat-treated for maximum performance
  • Axle: 3/4" diameter solid axle with lock nut
  • Neoprene sealed swivel section specify NS42
  • Lubrication: Zerk fitting in swivel section and in wheel hub for extended bearing life
  • Alternate or custom caster configurations available

Wheel Types

  • Moldon Rubber on Cast Iron (01 Roller Bearing)
  • Pneumatic (01 Roller Bearing)
  • Polyurethane on Cast Iron (01 Roller Bearing)
  • Vulkollan on Cast Iron (01 Roller Bearing)
  • X-TremeT Plus Solid Polyurethane (01 Roller Bearing)
  • Phenolic (01 Roller Bearing)
  • TrionixT High Impact Polymer (28 Precision Ball Bearing)
  • TrionixT NX High Impact Polymer (28 Precision Ball Bearing)
  • Polyurethane on Aluminum Flat Tread (01 Roller Bearing)

Products

SKU Wheel Material Bearing Type Diameter Tread Width Capacity (lbs) Overall Height (in.) Swivel Lead (in.) Approximate Weight (lbs.) Add to Quote
44MR10501R Rubber on Cast Iron Core Roller 10 3 1000 13-1/2 N/A 42-1/2
44MR12501R Rubber on Cast Iron Core Roller 12 3 1200 15-1/2 N/A 47-1/2
44NX10528R High Impact Nylon Precision Ball 10 3 1500 13-1/2 N/A 35
44NY10528R High Impact Nylon Precision Ball 10 3 1500 13-1/2 N/A 35
44PD10401R Polyurethane on Aluminum Core Roller 10 2-1/2 1500 13-1/2 N/A 38-1/2
44PY10501R Polyurethane on Cast Iron Core Tapered Roller 10 3 1500 13-1/2 N/A 48-1/2
44PY12501R Polyurethane on Cast Iron Core Tapered Roller 12 3 1500 15-1/2 N/A 56-1/4
44SF12701R Rubber on Cast Iron Core Roller 12 4-1/10 445 17-1/2 N/A 40
44SF12709R Rubber on Cast Iron Core Tapered Roller 12 4-1/10 445 17-1/2 N/A 40
44SF14801R Rubber on Cast Iron Core Roller 14 5-3/10 785 18-1/2 N/A 43
44SF14809R Rubber on Cast Iron Core Tapered Roller 14 5-3/10 785 18-1/2 N/A 43
44SF16801R Rubber on Cast Iron Core Roller 16 4-1/10 1000 19-1/2 N/A 45-3/4
44SF16809R Rubber on Cast Iron Core Tapered Roller 16 4-1/10 1000 19-1/2 N/A 45-3/4
44VY10501R Vulkollan® (polyurethane) on Cast Iron Roller 10 3 1500 13-1/2 N/A 48-1/2
44VY12501R Vulkollan® (polyurethane) on Cast Iron Roller 12 3 1500 15-1/2 N/A 56-1/4
44XP10501R Solid Polyurethane Roller 10 3 1500 13-1/2 N/A 35
44XP10509R Solid Polyurethane Tapered Roller 10 3 1500 13-1/2 N/A 35
44MR10501S Rubber on Cast Iron Core Roller 10 3 1000 13-1/2 3 42-1/2
44MR12501S Rubber on Cast Iron Core Roller 12 3 1200 15-1/2 3 47-1/2
44NX10528S High Impact Nylon Precision Ball 10 3 1500 13-1/2 3 35
44NY10528S High Impact Nylon Precision Ball 10 3 1500 13-1/2 3 35
44PD10401S Polyurethane on Aluminum Core Roller 10 2-1/2 1500 13-1/2 3 38-1/2
44PY10501S Polyurethane on Cast Iron Core Tapered Roller 10 3 1500 13-1/2 3 48-1/2
44PY12501S Polyurethane on Cast Iron Core Tapered Roller 12 3 1500 15-1/2 3 56-1/4
44SF12701S Rubber on Cast Iron Core Roller 12 4-1/10 445 17-1/2 4-1/2 40
44SF12709S Rubber on Cast Iron Core Tapered Roller 12 4-1/10 445 17-1/2 4-1/2 40
44SF14801S Rubber on Cast Iron Core Roller 14 5-3/10 785 18-1/2 4-1/2 43
44SF14809S Rubber on Cast Iron Core Tapered Roller 14 5-3/10 785 18-1/2 4-1/2 43
44SF16801S Rubber on Cast Iron Core Roller 16 4-1/10 1000 19-1/2 4-1/2 45-3/4
44SF16809S Rubber on Cast Iron Core Tapered Roller 16 4-1/10 1000 19-1/2 4-1/2 45-3/4
44VY10501S Vulkollan® (polyurethane) on Cast Iron Roller 10 3 1500 13-1/2 3 48-1/2
44VY12501S Vulkollan® (polyurethane) on Cast Iron Roller 12 3 1500 15-1/2 3 56-1/4
44XP10501S Solid Polyurethane Roller 10 3 1500 13-1/2 3 35
44XP10509S Solid Polyurethane Tapered Roller 10 3 1500 13-1/2 3 35